Cheap Car Wireless Bluetooth AUX Adapter HIFI Stereo Audio Music
Par un écrivain mystérieux
Last updated 01 juin 2024
Main Features:
1. Plug & Play: installed via original CD changer port, easy and fast, perfectly integrated with the car.
2. Wireless A2DP Playback: easily streaming music of Bluetooth devices into a factory car stereo system.
3. Hi-fi Sound Quality: Connected to car stereo via wire harness, no interference and no loss of sound quality, rivaling original CD sound.
4. Allow you to easily have a popular configuration of advanced car stereo, is the best choice for safe driving and enjoying digital music.
Specification:
Voltage Input : 4.5V ~14.6V DC
Operational Current : 600mA
Standby Current: 20mA
Operating Temperature: -35℃~+75℃
DAC Resolution : 20bit
Total Harmonic Distortion: 0.05%
SN Ratio : 90dB
Frequency Response: 20HZ-20KHZ
Package includes:
1x Universal Car Bluetooth 5.0 AUX Audio Cable
Note:
1. Doesn't support hands-free phone call(HFP): It doesn't supports answer/hang up etc. Via car radio buttons and steering wheel buttons.
2. Doesn't support Bluetooth AVRCP Control: Prev/Next Track, Pause/Play, Fast forward/backward via car radio buttons or steering wheel buttons.
Installation Guide:
Installation Preparation:
1. This product operates on a vehicle with 12 volts or 5-volt DC negative ground system. Do not use it on another voltage system.
2. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios.
3. Make sure the car stereo is powered off before installation. Otherwise, the car stereo may be damaged. It is suggested to install it in a car dealer shop or professional car stereo store.
4. Usually, the car stereo needs to be removed so as to plug the Bluetooth kit main connector into the CD changer port on the radio pack. For some car models, Bluetooth kits can be installed in the glove box or trunk where the external CD changer port is located.
5. Please read the car stereo wiring diagram carefully before installation (normally on the top side of the car stereo). Check and confirm where are the following ports on the back of the stereo: CD changer port, B+/Ub+/12V ACC port(different car stereos have different names. such as BAT, Bup+, B-U, MEM +12, KL.30), and GND port.
Installation Steps:
1. Turn off the car engine and remove the key from the ignition, if the car radio uses a security code, make sure that you have the code before unplugging the radio.
2. Unmount the radio from the dash in order to get access to the back side of the radio, and find the CD Changer port at the back of the radio. For details on unmounting, please refer to the car user manual or car stereo manual, or ask professional staff to unmount the radio.
3. Connect the wire harness to the car stereo radio module unit in advance. Be sure to make a firm connection. Then attach the wire harness connector to the back of the stereo to the CD changer port.
4. For some car models, connect the red wire to the B+/Ub+/12V ACC port (different car stereos have different names. such as BAT, Bup+, B-U, MEM +12, KL.30) or other correct ACC power or 5 / 12V battery power. Connect the black wire to the GND port of the head unit power module unit.
5. Turn on the car and power on the car Head Unit, press the CD (or Disc / Mode / CDC / SOURCE / AUX) button once or twice to switch to music play mode.
6. Turn on the Bluetooth function of the mobile phone, search and pair with a Bluetooth device named ''BT5909'', Mobile phone will be able to connect to BTA after being paired successfully. Test with a mobile phone to confirm whether Bluetooth music work normally.
7. After a successful test, re-assemble the radio, and put the wire harness and module unit box in the proper place (glove box, storage box, etc.), fasten the screws between the module unit and wire harness. Put the back car head unit into its original position. Now the installation is finished.
Important Installation Notes:
1. As to some vehicles with an external CD Changer, which occupies the original CD changer port, a Parallel Harness is needed to keep the use of the original CD changer (For some models only).
2. As for Clarion protocol radios, such as some Subaru radios and Suzuki radios, it requires totally unplugging the wire harness from car power before installation.
Moreover, it is easy to plug the connector in the opposite direction on Clarion radios, which causes short circuits. Make sure the connector is plugged in the correct direction.
3. As for installation on CAN-Bus radios of Peugeot/Citroen, Renault, Ford (new) and Mazda (new), and Opel, it is required to unplug the radio from the power before installation. Otherwise, the Bluetooth kit might not work properly or the radio might be damaged. Regarding Peugeot/Citroen without a pre-installed CD Changer, to enable the Bluetooth kit to work, the CD Changer function must be activated by professional tools. Please enquire the Peugeot/Citroen dealer on how to activate the CD Changer function.
5. As per BMW radios with CD Changer, the CD Changer must be completely disconnected before installation (The 3-pin and the 6-pin connector, which are located in the trunk, must be disconnected), otherwise, the Bluetooth kit will not be recognized. Besides, if the BMW radios are with DSP, an extra DSP kit and a specific Bluetooth kit would be used.
3 Applicable Car Models
Toyota Honda Volkswagen Benz Suzuki Nissan Porsche
Ford Fiat Acura BMW Wolvo Mazda Skoda Peugeot Renault
Citroen Opel, etc
This product only needs to have an AUX interface or the original
The car CD player can be used with the AUX interface.
(Please consult or confirm that you have an AUX interface before purchasing)
1. Not compatible with stereos that have 6 CD Player built into the stereo
2. Not compatible with the ''blue & me '' Bluetooth audio streaming feature
Also many devices from 2007 in connection with the Bluetooth model KCE-400BT.
Audio Bluetooth Receiver,HiFi Wireless Audio Adapter,Bluetooth 4.2
XCD Bluetooth Headphone Audio Transmitter Travel Adapter - JB Hi-Fi
Review: JOYROOM Bluetooth 5.3 Car Adapter with Dual Mics and Noise
JR-CB3 Wireless Receiver, Joyroom Bluetooth 5.3 Car Bluetooth Aux Adapter with Dual Mics and Noise Cancellation, Aux Bluetooth Car Kit with Plug and
Cheap Wireless Bluetooth 3.5MM AUX udio Stereo Music Home Car
[ Free Your Hands ] Built-in mic for hands-free calls. One-click multi function button (MFB) to answer/hang up/refuse/redial calls. The bluetooth for
Bluetooth Aux Adapter for Car - ZOACHII Wireless Audio Bluetooth 5.0 Receiver (Handsfree Call/Built in Mic) with 3.5mm Jack for Vehicle Truck Stereo
3 In 1 USB Bluetooth 5.0 Transmitter Receiver EDR Adapter Dongle
🚗[Bluetooth 5.3 Clearer Sound & Enhanced Microphone] JOYROOM Bluetooth car adapter is Equipped with the latest Bluetooth 5.3 technology, optimizing
Bluetooth 5.3 AUX Adapter [Multifunction Button& Battery Life Display] Noise Cancelling Music Receiver for Car/Home Stereo/Wired Headphones/Hands-Free
Intuitive and customized experience: It can't be easier to use Firefly Chat LDAC - it simply powers on when you plug in the USB on your car or speakers and connects right away to your phone (once you’ve paired it with Bluetooth). Plus, tailor your listening experience by downloading TUNAI Connect App - you can now easily adjust the EQ setting for your listening preference.
Tunai Firefly Chat LDAC Bluetooth Adapter - HiFi Wireless Bluetooth 5.0 Receiver with USB DAC 3.5mm Aux for Car/Home Stereo Music Streaming & Hands-f
3.5mm Jack Usb Car Wireless Bluetooth Aux Audio Cable Receiver
The Best Seamless Bluetooth Audio Receivers of 2024
Logitech Bluetooth Music Receiver review: Forget the aux cord
USA HIFI Car Bluetooth Music Receiver A2DP 3.5mm AUX Audio Jack
Recommandé pour vous
- BT-Pro V2 - Radial Engineering14 Jul 2023
- The 3 Best Bluetooth Audio Receivers of 202414 Jul 2023
- Do I Need A Bluetooth Transmitter or Receiver?14 Jul 2023
- Sound receiver bluetooth adapter aux jack usb14 Jul 2023
- PROZOR 192kHz DAC with Bluetooth 5.0 Transmitter Receiver14 Jul 2023
- Bluetooth 5.0 Audio Receiver Adapter NFC - Audio Signal Converters14 Jul 2023
- Ugreen Bluetooth 5.1 Transmitter & Receiver 2-in-1, Bluetooth Aux14 Jul 2023
- Bluetooth 5.0 Audio Receiver U Disk RCA 3.5mm 3.5 AUX Jack Stereo14 Jul 2023
- Audioengine B1 Bluetooth Music Receiver Review14 Jul 2023
- PROZOR 192kHz Digital to Analog Audio Converter with Bluetooth 5.014 Jul 2023
Tu pourrais aussi aimer
- caaly (@chrt6z)14 Jul 2023
- Tapis auto 3008 - Tapis caoutchouc, moquette - Lovecar14 Jul 2023
- Robe Licorne Fille à Volants en Tulle Violet en livraison gratuite14 Jul 2023
- Portrait De Jeune Maman Avec Bébé Blond à L'extérieur. Famille Heureuse. Maman Avec Bébé.14 Jul 2023
- Carton d'emballage 20 x 15 x 11 cm : : Fournitures de bureau14 Jul 2023
- Panier de rangement + Ma formule secrète pour créer le patron soi-même - tutoriel gratuit14 Jul 2023
- Отличная статья про Audi A6 C7 — Audi A6 (C7), 2 л, 2018 года, наблюдение14 Jul 2023
- Video Smart Lock S33014 Jul 2023
- 115.1166 : Pince à collier de durites type MU214 Jul 2023
- Drainage de base - drainage de terrain - drainage du sol - drainage des eaux - COSEEC FRANCE SAS14 Jul 2023